すべてのカテゴリ
electrical power poles
2250 見つかった物
円錐 220 の KV Dodecagonal 20M 十字の腕を搭載する 12 KN 鋼鉄電信柱
220KV Dodecagonal 20M 12KN Steel Electric Power Poles with Cross Arm Specification: Height From 9 meter to 100 meter Suit for Electric Power Transmission and Distribution Shape Polygonal or Conical Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm Q235B/A36, Minimum Yield Strength ≥ 235 N/mm As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Power Capacity 10kV to 220kV Tolerance of the dimension According to client’s requirement. Surface treatment Hot
3mmの厚さの8KN 10mの配分の電力線鋼鉄伝達ポーランド人
10m 8KN Electrical Power Pole For Distribution Power Line With 3mm Thickness Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission
電気の配分のための電流を通された伝達電力線ポーランド人の十字の腕
Octagonal Transmission Electrical Power Pole For Power Distribution Line Specifications Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base plate: Base plate is square or
高圧架空送電線の熱いすくいは瀝青を持つ36m鋼鉄電信柱に電流を通しました
36m Steel Utility Poles Hot Dip Galvanized Electric Power Pole For High Voltage Overhead Line with Bitumen Specification: Material: All of our material are purchased from famous mill factory to assure the quality. 1.A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material . 2.Before put into production ,all the material must pass the chemical and
10kV熱いすくいは電気送電線/管状の鋼鉄ポーランド人に電流を通しました
10kV hot dip galvanized electric power transmission line tubular steel pole Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission
15m十字の腕の付属品の熱いすくいの亜鉛めっきを用いるダン1200の八角形の鋼鉄伝達ポーランド人
15m 1200Dan Octagonal Conical Electrical Power Pole With Cross Arm Accessories Product information The power pole of our company are made from quality sheets through bending,forming, automatic welding, hot dip galvanization and powder coating. We owned advanced production-line, it included Flatting machine, Steel plate shearer, bending machine,Auto-closed up machine, submerged arc welding machine and powder coating line, and our workmanship and quality control was achieved
Setionの八角形の形のフィリピンのプロジェクトのための35FTの電力配分ポーランド人
Product name 35FT Electrical Power Pole Distribution For Philippines Project With Octagonal Setion Shape Material ASTM 572 grade 50 with yieled strength mo less than 450mpa Design service available,just offer design parameter Certificate ISO 9001:2008,etc Destruction test Available Welding method AWS D1.1 with penatration rate no less than 80%-100% OEM Available Wind pressure 5-300KM/H Pre-shipment test Available The products made by us is high resisitivity against heat
10kv 30kv 1000のダン10m瀝青を持つ12m八角形のポーランド人
10KV 30KV 1000 daN 10M 12M Octagon Electric Power Poles Specification: Material: Hot rolled steel, Q235,Q345,S235,S355,SS400,Gr 50 Yield strength of Material: Minimum yield strength>=235n/mm2 for Q235, S235 and SS400 Minimum yield strength>=345n/mm2 for Q345 S355 and Gr 50 Pole’s height: 3m –15m Length of one part Within 16m once forming without slip joint Wall thickness: 2.3mm-30mm Pole's Shape Can be made: Round, Polygonal, Taper Octagonal, Taper round, Round conical, Taper
8KN S500MCの3mmの厚さの鋼鉄標準10mの配分の電力線ポーランド人
8KN S500MC Steel Standard 10m Distribution Power Line Steel Transmission Pole With 3mm Thickness Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132
